4 Stroke 10HP Diesel Engine, 418CC Single Cylinder Air-Cooled Diesel Motor, Vertical Shaft Diesel Engine Gas Engine Motor for Go Cart, Mini Bike, Lawn Mower, Cement Mixer

Specification Model: 186FA Color: Black Material: Iron, Die-casting Aluminum, Aluminum Process: Spray Molding Machine Type: Single-cylinder, Vertical, 4-stroke, Forced Air-cooled Shaft Type: Recoil Manual Start Crankshaft: Horizontal Fuel Type: Diesel Bolt Pattern: 4 Bolt Combustion System: Direct Injection Lubrication Mode: Pressure and Splash Compound Method Power: 6.3kw, 10hp Rotation Speed: 3600rpm Displacement: 418cc Fuel Tank Capacity: 5.5L/1.45Gal Lubricating Oil Volume: 1.65L/0.44Gal Fuel Consumption Rate: ≤280g/Kw. h Compression Ratio: 19:1 Bore Stroke: 86x72mm/3.39*2.83inch Shaft Diameter: 25mm/0.98inch Shaft Length: 72.2mm/2.84inch Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm Depth Gross Weight: 49.85kg/109.9lbs Net Weight: 41.85kg/92.26lbs Package Size: 53*48*57.5cm/20.87*18.9*22.64inch Product Size: 43*41*49cm/ 16.93*16.14*19.29inch  Package Included 1*Diesel Engine 1*English Manual All Accessories for Assembly  Notes 1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included. 2.Please use the specified diesel and guarantee the diesel is clean. Please use different lubricating oils for different seasons and keep the oil quantity within the specified range. 3.Please don’t run the engine when it exhausts black smoke. 4.When using the air filter, remove the air filter element every 50 hours (if there is much dust, remove it every 10 hours, clean it with clean detergent, blow it dry, and then put it into use). 5.Please allow the slight color difference caused by the shooting chandelier and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• High Quality Materials: Made of high-quality iron, aluminum, and die cast aluminum, with a sturdy structure and good heat dissipation. The surface is treated with environmentally friendly spraying technology, which can improve the corrosion resistance of the engine. This product is widely used in agricultural operations, garden irrigation, drainage and emergency maintenance, as well as small construction machinery. It can also be used in the field of small agricultural machinery.
• Powerful and Efficient: This four stroke engine has a power of up to 6.3kw and a speed of up to 3600rpm, providing you with powerful power, improving your productivity, and saving you time and energy. The fuel tank of this engine can hold 1.45 gallons of fuel. The large capacity allows for continuous use with fewer interruptions and no need for frequent refueling.
• Easy to Use: It adopts a manual recoil start method, which is more convenient for your operation and allows you to work faster with it. In addition, the ergonomic design knob can be positioned at any speed. It is also equipped with a throttle cable mounting bracket, which can be installed as needed.
• Good Heat Dissipation: The forced air cooling system and dense cooling holes in the casing can quickly and efficiently dissipate heat, which not only extends the service life of the engine, but also ensures that the engine will not stall even after long-term operation. A pressure reducing valve can help control the air pressure inside the engine cylinder, preventing the engine from generating excessive air pressure during operation, thereby protecting the engine and cylinder from damage.
• Stable Engine: High quality air filters can prevent impurities and dust from entering the engine interior, improve engine performance, and extend service life. In addition, it adopts a single valve direct fuel injection system, which can improve fuel utilization efficiency and reduce engine wear. The dipstick can help you check the oil level and quantity at any time, and refuel in a timely manner to keep the engine running normally.